From bw@ashbysolutions.com Mon May 11 08:35:11 2015
Subject:Re: Ventilator question

That's what I do in my gigging rig. I use a Behringer RX1602, send the
effect send of my NE3 and my guitar to the Vent (with the main sends
turned down), and then use CH15/16 as a return for my mini-Vent. This
actually helps on the send side, as the Mini can't take the output of
the NE3 with Gain=max.; but I use the Gain control as my 'distortion'
knob on the organ. I found that turning down the effect send, and
increasing the Drive setting on the Vent creates a situation where
Gain=4 is clean, Gain=6 is typical rocker, and Gain=10 is 'Gregg Rolie.'

Regards,

-BW

Bruce Wahler
Ashby Solutions.com™
bw@ashbysolutions.com
http://music.ashbysolutions.com
877.55.ASHBY (877.552.7429)

On 5/11/2015 11:14 AM, chipster_@mac.com [CloneWheel] wrote: