From johnnypro@aol.com Wed Apr 22 12:49:34 2015
Subject:Re: Motion Sound Pro 3
I think you just pull off the square cover on the bottom: 4 screws. The driver just screws on??? JP
-----Original Message-----
From: 'Bohachewsky, Andrew V.' abohachewsky@draper.com [CloneWheel] [CloneWheel]
To: CloneWheel
Sent: Wed, Apr 22, 2015 11:19 am
Subject: RE: [CWSG] Motion Sound Pro 3
I don’t think you need to take it that much more apart than when adjusting the speeds (based on opening up my Pro3-X). The Selenium, PRV and stock drivers all have the exact same form factor.
I haven’t really been using the Pro3X much lately, going with either Burn or Vent recently. I have both a Selenium and PRV driver lying around with which I’ve been meaning to do a swap out A/B/C test (other priorities unfortunately).
~Andy
From: CloneWheel@yahoogroups.com [mailto:CloneWheel@yahoogroups.com]
Sent: Wednesday, April 22, 2015 10:09 AM
To: CloneWheel@yahoogroups.com
Subject: Re: [CWSG] Motion Sound Pro 3
These will screw right in?? I need to take my Pro 3 apart!!
Thanx!! JP
-----Original Message-----
From: 'Bohachewsky, Andrew V.' abohachewsky@draper.com [CloneWheel] [CloneWheel]
To: CloneWheel
Sent: Wed, Apr 22, 2015 9:23 am
Subject: RE: [CWSG] Motion Sound Pro 3
These are replacements. I’ve heard the Selenium sounds better than the stock driver. The PRV seems to be a Brazilian knockoff of the Selenium.
https://www.parts-express.com/selenium-d250-x-gw-1-phenolic-horn-driver-1-3-8-18-tpi--264-204
https://www.parts-express.com/prv-audio-d250ph-s-1-phenolic-horn-driver-8-ohm-1-3-8-18-tpi--294-2825
~Andy
From: CloneWheel@yahoogroups.com [mailto:CloneWheel@yahoogroups.com]
Sent: Friday, April 17, 2015 4:59 PM
To: CloneWheel@yahoogroups.com
Subject: [CWSG] Motion Sound Pro 3
Anybody out there got a digital copy of the Owner's Manual for the Motion Sound Pro 3?? Mine is the older style (2001??) with a tube and the Low Pro Output DIN. Mine's got a bad diaphragm but seems to be working otherwise. I copied info on troubleshooting the diaphragm from Motion Sound's website, but they don't have the manual anywhere I can find it. Any help would be greatly appreciated. Anyone got a spare Diaphragm?? :-) Thanx!! John P (Johnnypro@aol.com)
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper Laboratory. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper Laboratory. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.