From frederick.somerville@gmail.com Wed Mar 27 11:52:41 2013
Subject:Re: Attempt to get that Hammond sound!

If you need more signal than the line outs on a Nord use the High out and
turn down the master volume until you have a good level
Regards Frederick

2013/3/27 Bruce Wahler

> **
>
> The Vent does NOT like 3.5VRMS. I did some experimenting with it when I
> first started selling them. Ideally, it likes 1.0-1.5VRMS, which will
> fully drive the input, but not turn the Overload light on continuously.
>
> Regards,
>
> -BW
>
> Bruce Wahler
> Ashby Solutions.com^(TM)
> bw@ashbysolutions.com
> http://music.ashbysolutions.com
> 877.55.ASHBY (877.552.7429)
>
> On 3/27/2013 12:00 PM, Frederick Somerville wrote:
> > If you want to drive the Vent hard form a Nord (C1 C2 C2d) then use the
> > High out - you have up to 3.5 V rms there.
> > Regards Frederick