From ljabaa@yahoo.com Sun Feb 24 19:33:31 2013
Subject:Re: hammond sk1

Jim, again, thanks for your reply. Not sure now if I will be keeping the SK1 or returning it. I think Hammond slipped up on this issue.
Leo


________________________________
From: jjmcs49
To: CloneWheel@yahoogroups.com
Sent: Sunday, February 24, 2013 5:53 PM
Subject: [CWSG] Re: hammond sk1


 


Unfortunately you can't. Expression can only be controlled by one thing at a time. I control my SK-1 via MIDI and would like to be able to assign the Expression pedal jack to control the various effects that can be varied by the expression pedal (Wah-Wah, Ring Modulator etc.) but I can't do that either.

Maybe someday.

--- In mailto:CloneWheel%40yahoogroups.com, leo aquilina wrote:
>
> Hi Jim, thanks for your reply. Here is where I am. The SK1 responds to CC#11 messages from the sequenceer to control volume. Under CONTROL the source has to be set to MIDI. But with that setting I am not able to control the volume with the FC7 pedal. So if the next song I want to play the organ live, I have to remember to reset the souce to ped(rev) so that I can contol the volume from the pedal. By the way, under MIDI I'm using the Basic Template, MIDI IN set to Sequencer, also using channel 16 for the upper and channel 15 for the lower for both transmit and receive.
> With the CX3 I am able to control the volume with expression messages sent from the sequencer and at the same time use the expression pedal live. there is nothing to reset between songs. Any ideas how to accomplish this on the SK1?
> Thanks very much. Leo
>
> ________________________________
> From: jjmcs49
> To: mailto:CloneWheel%40yahoogroups.com
> Sent: Saturday, February 23, 2013 3:14 PM
> Subject: [CWSG] Re: hammond sk1
>
>  
>
> You might also need to set the MIDI In to "Sequence" (Pg. 110 #2). The Basic Template (Pg. 110 #1 and Pg. 132) may set everything the way you need it.
>
> --- In mailto:CloneWheel%40yahoogroups.com, "jjmcs49" wrote:
> >
> > Have you set Expression control to MIDI? (Pg. 78 #4)
> >
> > --- In mailto:CloneWheel%40yahoogroups.com, leo aquilina wrote:
> > >
> > > A questions on using the sk1 with a sequencer. I am unable to control the expression (volume) from the sequencer. I am using a song where I played the organ part on a CX3 using the expression pedal.  I can see CC#11 changes in the file. They do control the CX3 but not the SK1. I am using SK1 with relaese #6.  Thanks much for any help.
> > > Leo
> > >  
> > >
> > > ________________________________
> > > From: James Eaton
> > > To: CloneWheelList mailto:CloneWheel%40yahoogroups.com>
> > > Sent: Saturday, February 23, 2013 9:09 AM
> > > Subject: [CWSG] Re: will korg cx3 expression pedal work on hammond sk1?
> > >
> > >  
> > > The levels of a B3 TWG out of the factory a something of a mystery, and were likely different on every organ.   Not sure putting them all up to 11 will give you the result you want, although you will definitely get a result :).  You could try downloading Kon Zissis' spreadsheet http://www.dairiki.org/HammondWiki/KonZissis and using the levels he collected from various enthusiasts to get an idea of what the levels might have been.
> > >
> > > jjmcs49 wrote:
> > > <>
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]