From dan.for@tiscali.cz Sat Nov 03 23:16:00 2012
Subject:Re: CX3 Midi - still no go

Are you sure you connected your MIDI cable from MIDI Through on
Kurzweil to MIDI In on Korg as Toby wrote?

And you have to send program change data (PC), not MIDI controllers
00/32 for Bank Select (CC).

And to receive MIDI data Korg must be set to the same MIDI channel as
transmitting device.

And maybe even with such connection something must be set in Kurzweil
for Through to work, maybe some filters for MIDI data switched off, I
don't know... I haven't got Owner's manual to check it. Consult your
manual.

If everything is connected and set well it must work.

If there's no hardware or software problem, usually mistake is on the
side of user. After almost 40 years of using electronic instruments I
managed to do such stupid mistake on the rehearsal before my yesterday
gig I'd never believe I can do:

Being in hurry I've connected one of the footswitches to the connector
for volume pedal, and then wondered why there was no signal on the
output. Found the mistake after 3 minutes. Good lesson.

Daniel Forro

On Nov 4, 2012, at 1:49 PM, Wayne Powell wrote: