From rohan70@tpg.com.au Thu Jun 28 02:00:29 2012
Subject:Re: 11 pin ventilator cable

G'day James,

Thanks for your feedback.

--- In CloneWheel@yahoogroups.com
, Rohan Baker wrote:
>> 1/ the power from the PSU to the 11 pin plug is in parallel, not
series
>> correct? The instruction PDF was a little vague on this.
>
>Ground on PSU to pins 4 and 5
>+12v on PSU to pin 11 to tell the XK that the Leslie is connected

Are you sure about the ground to pin 4 and 5? Pin 4 is audio ground. The
Ventilator 11 pin construction cable notes say you only need to connect
the ground to pin 5.

>> 2/ instead of butchering the PSU supplied with the Ventilator so
the XK
>> can see the voltage and hence bypass the internal sim output, is it
> >possible to connect that to an additional 12V PSU to fool the XK3?
>
>Why not make a through adaptor with a line socket on one end that
attaches to your PSU, and a line plug on the other that attaches to
the Ventilator, and in the middle it >connects to your 11-pin plug.
No butchering necessary.

I'm having trouble finding the parts. BTW, what size is the plug?

Cheers,

Rohan
Melbourne, Australia.

[Non-text portions of this message have been removed]