From tomnykds@att.net Sun Jan 15 08:06:12 2012
Subject:Re: To change caps in tone generator or not?

PPS: be carefully of the frequency response of your volt meter. Depending,
the measurable AC frequency starts dropping off at maybe 1KHz. Any o'scope
would work fine.

From: CloneWheel@yahoogroups.com [mailto:CloneWheel@yahoogroups.com] On
Behalf Of James Eaton
Sent: Sunday, January 15, 2012 1:46 AM
To: CloneWheel@yahoogroups.com
Subject: [CWSG] Re: To change caps in tone generator or not?

PS: If you want to confirm, put a voltmeter on the generator terminals and
measure the AC voltage in mV. It should be around 4 to 4.5mV at tones
49-55. You'll probably have about 3mV from 49 and up and then about 1mV
from tone 55 in wax cap organ because of the ageing of the caps.

[Non-text portions of this message have been removed]

_____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1416 / Virus Database: 2109/4142 - Release Date: 01/14/12

[Non-text portions of this message have been removed]