From frederick.somerville@gmail.com Sun Apr 01 13:30:29 2012
Subject:Re: I have started a dedicated Nord C2d channel on youtube

That is probably because I set the c2d up that way.
Accellerate time has three settings. Slow normal fast
So does the speeds of the rotors.
On 122/145/147 you have three positons on the top rotor pulley.
The bottom rotor had fixed speed.
Acceleration times for the bottom rotor is adjusted with belt tension
You can do on the top rotor but this is not provided as standard.
You can move the screw that holds the combined spring tensioner.
I have done that on my 145 leslie since I like a little slower than standard rampup/down times for the top rotor.

Regards Frederick Somerville

Sent from my iPhone