From Bluzhd@aol.com Sat May 21 13:23:49 2011
Subject:Re: GT SFX mod

Do you not run any additonal amps off the sub out? Im curious how it works on its own post mod. I go to a barbtta 41c
Amd it sounds really good,maybe a 10" wouldbe even better!
Connected by MOTOBLUR™

-----Original message-----
From: Joe Gennosa
To: CloneWheel@yahoogroups.com
Sent: Sat, May 21, 2011 18:52:02 GMT+00:00
Subject: [CWSG] GT SFX mod

The 8" coaxial just does not have enough paper, so I found that Eminence 10" coaxial is the next size up that the horn driver can screw right into. I took out the 8 and used a fine blade jig saw to cut the baffle hole large enough to accommodate the 10. Carefully; it is a POS paper glue affair; no real wood there! There is NO room for anything else; as it is I had to drill out new holes for the bolt anchors, and had to use regular wood screws for the holes that had NO ROOM for the anchors. This is tight. I left the port alone; it moves a lot of air if you push the bass too much. I didn't expect much, but for the cost of the speaker and some work it is now a decent amp. Using it tomorrow nite live for the first time on a gig and I'll let you know how it holds up in the mix. I think the GT is a great stereo effect monitor on stage and dropping a line to FOH is great. I've had a lot of comps when using it in small gigs; "where's the Leslie tonite?" it works
for me on a limited capacity. If you are good with measurements and can handle removing the speakers, pc amp board and interference, go for it. Good Luck!

JoeyGB3NY

' ' ' *  !!!""" !!!!!!!!! !'!""" !""!!!! ' ' ' '
      liiliiiliiliiiliiliiiliiliiiliiliiill
      liiliiiliiliiiliiliiiliiliiiliiliiill
     \^\^\ l^l^l^l l^/^/ /^/^/^/ /

[Non-text portions of this message have been removed]

------------------------------------

To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.comYahoo! Groups Links

[Non-text portions of this message have been removed]