From michaelcasino@verizon.net Mon May 16 08:25:28 2011
Subject:RE: Numa + 11-pin Out

A bad cable can be a problem but if you are plugging the Cable to the 147
upside down you are putting AC across the signal input. Not good! Make sure
the cable is in the correct alignment.

What repair is needed to the cable?



Mike



From: CloneWheel@yahoogroups.com [mailto:CloneWheel@yahoogroups.com] On
Behalf Of M T
Sent: Monday, May 16, 2011 11:12 AM
To: CloneWheel@yahoogroups.com
Subject: Re: [CWSG] Numa + 11-pin Out





No signal...didn't power on the Leslie. I tried plugging it in upside down
and
got power to it but no audio. It is possible that I had a bad extension cord

form the box to the Leslie. I will try it after repairing the cable.

________________________________
From: Michael Casino >
To: CloneWheel@yahoogroups.com
Sent: Mon, May 16, 2011 10:00:37 AM
Subject: RE: [CWSG] Numa + 11-pin Out

OK

Is the audio defective, the switching or both?

Mike

From: CloneWheel@yahoogroups.com
[mailto:CloneWheel@yahoogroups.com ]
On
Behalf Of M T
Sent: Monday, May 16, 2011 10:56 AM
To: CloneWheel@yahoogroups.com
Subject: Re: [CWSG] Numa + 11-pin Out

Michael,

Yes. Right after I sent my last message, I checked the BB site and it is a
1147
kit. I assumed this would work with the 11 pin out of the Numa.

________________________________
From: Michael Casino
>
To: CloneWheel@yahoogroups.com

Sent: Mon, May 16, 2011 9:54:06 AM
Subject: RE: [CWSG] Numa + 11-pin Out

Dose 1147 sound familiar?

Mike

From: CloneWheel@yahoogroups.com

[mailto:CloneWheel@yahoogroups.com
]
On
Behalf Of M T
Sent: Monday, May 16, 2011 10:48 AM
To: CloneWheel@yahoogroups.com

Subject: Re: [CWSG] Numa + 11-pin Out

I don't think it has a brand on it. I got it a few years ago from BB Organ
in
Minneapolis for my XK3.

________________________________
From: Michael Casino
>
To: CloneWheel@yahoogroups.com


Sent: Mon, May 16, 2011 9:17:53 AM
Subject: RE: [CWSG] Numa + 11-pin Out

What converter box are you using?

Mike

------------------------------

Has anyone tried using the 11-pin out on the Numa Organ? I tried mine with a
147
converter box that I used to use with my XK3. It doesn't seem to work and I
am
not sure why. Has anyone used this with any success?

Thanks,

Mitch

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]