From michaelcasino@verizon.net Mon Jun 27 12:17:06 2011
Subject:RE: xk-1 -> 1147 -> 145

What I think you are missing is a signal to turn on a relay in the 1147 kit.
Try jumping pins 5&6 on the 11 pin socket.



8 to 11

Pin Pin

Out in



1 rotary audio in 1

3 audio GND 4

7 fast 7

8 slow 8

4 & 2 control GND 5 & 6 power on (5 to 6)





Mike



---------------------------





Hello all, trying to tie together my xk1, 1147 and Leslie 145 by making up
an 8 pin to 11 pin cable between the organ and 1147. I realize this may not
be possible without purchasing another HS adapter kit, but I'm trying.
Following pinout charts, 11 & 8 pin mods for use with the Ventilator, and
schemos for the 1147, Leslie 2101 service guide 8 pin schemo, & HS 8 pin
cable I own ( of course HS uses different color wires in the 8 pin cable)
for guidance, but I have hit a snag. The Leslie turns on, runs on slow only,
no speed control working, and no audio signal.

Here's what is connected; using an 11 pin cable, 11 pin female, and 8 pin
din connector.

11 pin female; all 11 wires according to Uncle Harvey's pinouts; verified by
looking inside the malle 11 pin on the 1147 kit.

8 pin cable pin 1 brown audio, pin 2&5 jumped and connected to green wire
central supply common and metal shield on 8 pin side, pin 3 yellow audio
ground, pin 6 blue control circuit common, pin 7 violet fast trigger, pin 8
gray slow trigger.

Any ideas, thought, critics welcome. The 1147 & 145 function as they should
connected to my NC2 11 pin plug. Thanks all. I have also tried some other 8
pin combos, but no joy! Note; cross posted to Ham xk-3 group.
JoeyGB3NY



[Non-text portions of this message have been removed]