From bruce@ashbysolutions.com Mon Aug 29 11:22:45 2011
Subject:Re: Hammond M to Vent

Hi Bob,

The IMP-2 only has -20dB, which is probably not quite enough, if you are
tapping off the power amp. (If you are using the preamp, it might work.)

The EDB-1 or the Director is a better choice, as is the ART Zdirect.

All of them are actually going the 'wrong' way, in terms of easy
connections -- i.e., the 1/4" plug is on the 'high' side. You want the
XLR output to go to the Vent.

Also, remember that even if the DI box is OK with a speakerless load,
the M's tube power amp won't be. If you plan to run off the speaker
taps, and *don't want any audio from the built-in system, you'll need a
dummy speaker load on the spinet.

Regards,

-BW

Bruce Wahler
Ashby Solutions.com^(TM)
bruce@ashbysolutions.com
http://music.ashbysolutions.com
877.55.ASHBY (877.552.7429)

On 8/28/2011 2:30 PM, redandblue@qis.net wrote:
> Hi Bruce,