From mon8169@iservicesmail.com Mon Oct 25 08:34:08 2010
Subject:RE: Nord C1 and C2 Voltage Change

Hal, (don't forgett to) remember at which voltage you have the switch
when returning to a 230V country!!!

Ramon


-----Mensaje original-----
De: CloneWheel@yahoogroups.com [mailto:CloneWheel@yahoogroups.com] En
nombre de Hal T
Enviado el: dilluns, 25 / octubre / 2010 05:18
Para: CloneWheel@yahoogroups.com
Asunto: Re: [CWSG] Nord C1 and C2 Voltage Change



Thanks you guys for your helpful responses.

I opened my C1 and C2, and I found the voltage switch inside. You can
only
change 115V or 230V. It's good for both 50Hz and 60Hz. Since a lot of
electronics are set for 115V but work with 100V, I tried both C1 and C2
without
any transformers. They work perfectly for 100V even though they are set
for
115V.

From now on, I don't have to bring a step-up transformer for every gig.
That's
good.

Thanks guys!

Hal

________________________________
From: dazzjazz >
To: CloneWheel@yahoogroups.com
Sent: Sun, October 24, 2010 10:03:12 AM
Subject: Re: [CWSG] Nord C1 and C2 Voltage Change


The C1 has a voltage selector inside - unscrew the right hand wooden
cheek and
you should find it there. As Dr. Lonnie once said to me "if it had hair
on it,
you'd find it!"

Darren

--- In CloneWheel@yahoogroups.com
, Daniel Forró wrote:
>
> I moved to Japan 7 years ago with lot of older and new instruments
> and other studio gear (list is on my page on Soundclick), there were
> mainly on European 220 V, so I have to use step-up transformers. Some
> of them could be switched or set inside by junctions or soldering to
> work only on 115 V, not 100, but they work without any problem on 100
> V. Most of them accept both 50 and 60 Hz, that also was not problem.
> That's true that different areas in Japan have 50 or 60 Hz, you have
> to ask local people, city office or electric company. If there's some
> problem, you can sell your instrument (not here in Japan of course)
> and buy localised version.
> BTW where are you?
>
> Daniel Forro
> www.soundclick.com/forrotronics
>
> On 24 Oct 2010, at 3:06 AM, jbblsman wrote:
>
> > I have some questions and some of you guys probably can help.
> >