From ken@kenhall.ca Wed Mar 10 17:57:21 2010
Subject:Re:New Ventilator- Footswitch??

David,

That's a good question, but in it's original state, the two switches are
bypass and slow/fast. You need some kind of external switch for stop.

Ken

djacques@csulb.edu wrote:
>
>
> Why don't you put it on the floor and use it as a stomp box?
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Tom Sellers" > >
> Date: Wed, 10 Mar 2010 17:38:00
> To: >
> Subject: Re: [CWSG] Re:New Ventilator- Footswitch??
>
> Ken-
> Neither switch has 3 terminals. The switches are wired as follows:
> Switch 1: Red/Common
> Switch 2: Black/ common (attached through switch 1).
> This is simply an old peavey amp 2 switch floor unit, but it may have
> been rewired. It works well on my HK Tube Rotosphere. It looks like
> there is room for a third switch as well.
>
> Ideally I would like one switch to be Fast Slow and the second to be
> Fast and Stop. At this point if I could simply get a single switch
> that would do Fast/slow I'd be OK.
>
> Someone said the Boss FS-6 could be configured to work, and the Vox
> VFS-2 looks like it might also be a possibility, but I would hate to
> buy them and possibly be stuck with something I cannot use.
>
> Alternatively, if you have a simple wiring diagram I could probably
> order the parts from mouser and put it together myself without too
> much trouble. If you have one for sale I would be glad to work
> something out with you. Guido really did not provide any additional
> info- probably hoping to sell his switches. I cannot afford to wait
> that long or pay international shipping!!
>
> Any help is GREATLY appreciated!!
>
> Thanks-
>
> Tom
> ----- Original Message -----
> From: ken@kenhall.ca
> To: CloneWheel@yahoogroups.com
> Sent: Wednesday, March 10, 2010 1:58 PM
> Subject: Re: [CWSG] Re:New Ventilator- Footswitch??
>
> Hi Tom,
>
> No problem. I need you to tell me how many terminals there are on each of
> the switches in your pedal. One of them needs to have at least 3
> terminals. Let me know what you have there ( a photo is always good if
> possible ) and I'll be glad to help.
>
> Ken
>
> > Ken-
> > I did not get your original post, and thus cannot respond to you
> directly.
> > Please get in touch w/me via e-mail directly. If I could get some help
> > on the correct way to rewire an existing 2 switch foot switch with a
> > single TRS out it would really help- I only plan to use the vent
> remotely
> > w/ the foot switches, so I do not want to rewire it.
> >
> > Thanks
> > Tom
> > ----- Original Message -----
> > From: iselin65
> > To: CloneWheel@yahoogroups.com
> > Sent: Wednesday, March 10, 2010 12:13 PM
> > Subject: [CWSG] Re:New Ventilator- Footswitch??
> >
> > i would imagine when you re-wired the vent switches, you disabled the
> > bypass function? or is there any way around that?
> >
> > matt
> >
> > --- In CloneWheel@yahoogroups.com
> , ken@... wrote:
> > >
> > > I have had complete success building pedals for the Ventilator. I
> have
> > > dual switch units (rotate/stop, slow/fast) in both latching and
> > momentary,
> > > a 1/2 moon with slow/stop/fast and a single slow/fast latching
> > footswitch.
> > > I have also re-wired my Ventilator so that the two onboard switches
> > are
> > > rotate/stop on the left and slow/fast on the right. These are not
> > > complicated projects, you just need the right type of switches and
> > just
> > > follow the diagram that came with the Ventilator. I would be happy to
> > > help anyone on the list to make whichever type of switch they need -
> > just
> > > contact me privately.
> > >
> > > Cheers, Ken
> > >
> > > > I believe Quido may have al solution in the works.
> > > >
> > > > But until then I have not found a way to do fast/stop/slow in any
> > > > order.
> > > >
> > > > One person that posts here occasionally suggested another pedal but
> > > > I'm not sure of the brand or how it was connected.
> > > >
> > > > I have also tried piano sustain pedals which will give 2 speeds but
> > > > not 3.
> > > >
> > > > Sent by Bob B.
> > > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]