From ted@speakeasyvintagemusic.com Tue Nov 10 06:52:23 2009
Subject:Re: What to Use for Tube Distortion Between KORG Clonewheel and SS Leslies?

The AMA isn't a preamp.

The speaker would need to be 16 ohms for a 122 amplifier.

Cheers!

Ted Thompson (ted@speakeasyvintagemusic.com)
General Manager - Speakeasy Vintage Music

-------------------------------------------------------

PH: 717.292.0814
Main Site: http://www.speakeasyvintagemusic.com
Media Site: http://media.speakeasyvintagemusic.com
Support: http://support.speakeasyvintagemusic.com
MOSweb: http://www.mosweb.com


> -----Original Message-----
> From: CloneWheel@yahoogroups.com
> [mailto:CloneWheel@yahoogroups.com] On Behalf Of ghvc1
> Sent: Monday, November 09, 2009 7:35 PM
> To: CloneWheel@yahoogroups.com
> Subject: [CWSG] Re: What to Use for Tube Distortion Between
> KORG Clonewheel and SS Leslies?
>
> Another alternative although a little involved is to convert
> your 760 to a 122. Add a 122 AMP, replace the 15" with an 8
> OHM speaker, add crossover and a fishsticks motor kit. Tubes
> in the output stages are more critical than the preamp
> portion according to my liking.
>
> --- In CloneWheel@yahoogroups.com, "Nipper" wrote:
> >
> > Hi, Folks,
> >
> > I'm looking for advice in what to run my digital BX-3
> through, on the
> > way to solid-state Leslie 760s, that'll provide an "acceptable"
> > distortion, a la 147/122. I've already auditioned units from ART,
> > Behringer, EH and Presonus, but they all colour the sound.
> > Additionally, I've had frustration achieving a balance
> between the FX
> > mode and Bypass mode, on these devices. (My leslies are
> minty, stock
> > versions and I don't want to scar them with mods like the Mig L
> > circuit.)
> >
> > All suggestions will be greatly appreciated.
> >
> > Regards,
> >
> > Mik
> >
>
> ------------------------------------
>
> To unsubscribe, send email to:
> CloneWheel-unsubscribe@yahoogroups.comYahoo! Groups Links
>

[Non-text portions of this message have been removed]