From goffmac747@aol.com Thu Feb 12 18:56:17 2009
Subject:Re: re Leslie tone


Ok, that being done, how does the xover then affect the balance of the other bars as you add and open them up? And how does one know when an optimal xover point is reached that equally addresses the whole set of 9?





-----Original Message-----
From: Jason
To: CloneWheel@yahoogroups.com
Sent: Fri, 13 Feb 2009 9:47 am
Subject: [CWSG] Re: re Leslie tone




I test tone with 800000000. The unique but odd thing with the 2101 is

that while the horn X-over is variable (700,800,1kHz) the lower sim

drivers are not (fixed at 1.1khz) did the math, found the coil type I

wanted, and tested it at @600hz. I liked the thicker tone at that

point, and no stepping on each other's toes in the 700-1khz range.

(I've done similar things to my old MS gear in past years)

J

test tones specs:

700hz = @ E5

800hz = G5

1kHz = @ B5

1.1kHz= @ C6








..











[Non-text portions of this message have been removed]