From bruce@ashbysolutions.com Sat Jun 30 12:10:37 2007
Subject:=?ISO-8859-1?Q?Re=3A_=5BCWSG=5D_Internal_CX-3_settings_?= =?ISO-8859-1?Q?_when_using_leslie?=

Hi Russ,

I use the Preamp setting when going into a Leslie, and I've found that boosting the Mid and slightly rolling off the Bass helps a bit. I'm talking about maybe Bass = -4, Mid = +3, Treble = 0. YMMV.

Regards,

-BW
--
Bruce Wahler
Online Music Sales
AshbySolutions.com_ http://music.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com

At 06:49 PM 6/30/2007, you wrote:
>Hi,
>
>I have a newer CX-3 v2 that I sometimes use with a trek pre-amp and
>Leslie. I saved a bank of my favorite KORG presets with the internal
>leslie/rotary sim turned off for this purpose. There are also times
>when I use the CX without the Leslie (using the internal simulation),
>so I have another bank of the same presets with the rotary simulation
>setting turned ON for that purpose. I would like to know if there are
>recommended internal settings that should also be edited when using a
>Leslie. I simply want the true sound of the organ and Leslie minus
>internal effects, etc. in my mix. Just turning off the internal rotary
>simulation is fine, but I was thinking there are probably other tweaks
>that could be done to accomplish what I am after. I hope this makes
>sense! I looked around on the forums and found settings to enhance the
>internal leslie sim for realism, but not for bypassing them when using
>a leslie (although I could have missed it, too). Any help is appreciated.
>
>Regards,
>Russ.

[Non-text portions of this message have been removed]