From bruce@ashbysolutions.com Sun Jul 22 06:24:55 2007
Subject:=?ISO-8859-1?Q?Re=3A_=5BCWSG=5D_CX3__software_upgrade_?= =?ISO-8859-1?Q?_problem...need_help?=

Hi,

To my knowledge, the only update available WAS version 2.01. If you had version 2.00, that must have been a factory-only revision.

As to your problem, try setting the expression to Both, not Multi.

Both -- either the knob or the pedal can set the expression level.

Multi -- the pedal and the knob are "multiplied." The pedal can only travel from zero to the knob setting. If the knob is set to zero, the pedal can go from zero to zero; i.e., it will have no effect.

If this does not cure your problem, then you have a hardware issue with the organ.

Regards,

-BW

--
Bruce Wahler
Design Consultant
Ashby Solutions_ http://consult.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com

At 05:17 AM 7/22/2007, you wrote:
>A few weeks ago I had a background noise issue with my 2001 CX3. When
>you would hold down a key, you could hear a windlike sound behind the
>note, especially in the upper registers. My CX3 had ver.2.0 software
>in it. I took it to EPR electronics in Tampa, Florida. They are
>certified techs for all the major keyboard brands. They borrowed a new
>CX3 from Sam Ash to compare it to, and decided to download the newest
>version (2.01) to eliminate the noise issue. The noise issue seems to
>have been eliminated, but now my expression pedal is not working
>correctly. When the unit boots up, the global setting for the
>expression pedal is multi (both the volume knob and the expression
>pedal should control the volume, but the pedal does not work). If I set
>it on pedal, the pedal does nothing. If I set it on knob, the knob
>control works, but interestingly enough, if I pull out the expression
>pedal from the input jack, the knob still works, but the actual volume
>increases by at least 50%. I can bypass the expression pedal control
>volume issue by putting a simple volume pedal in line, but I want my
>CX3 to perform the way it was intended to perform.
>ANYONE HAVE ANY IDEAS AS TO WHAT HAPPENED WHEN THE UPGRADED SOFTWARE
>WAS PUT INTO MY KEYBOARD?
>
>To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>Yahoo! Groups Links
>

[Non-text portions of this message have been removed]