From bruce@ashbysolutions.com Thu Oct 12 05:17:59 2006
Subject:Re: ME1

Hi Elliot,

>I have the same configuration as yours and found out that pulling out
>the drawbars, transposed the ME1.
>
>It's a MIDI message that has to be disabled in the CX-3, can,t
>remember if it's global or per patch, but it's doable.

There are two ways to do this.

- I you don't have any need for drawbars and switches from the CX-3 to go to your other keyboards/modules, then there is a setting in the Global Edit menu called "MIDI Tx C. Change" that can be set to Off. This will prevent the CX-3 from sending ANY Control Change (CC) values.

- If you still need some CC info (like the sustain pedal, perhaps?), each one of the control elements -- drawbars, switches, pedals, etc. -- can be either moved to another CC#, or disabled (set to Off). Find the one(s) that you are having problems with, and change it. If you change the CC# to a different one, and the number flashes, that means that the CX-3 is already using that CC# for something else. This method either requires some knowledge of the CC#'s used by both the CX-3 and the Kurz module, or a bit of trial and error.

Regards,

-BW

--
Bruce Wahler
Online Music Sales
AshbySolutions.com™ http://music.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com

[Non-text portions of this message have been removed]