From uralmoto2001@yahoo.com Fri Jan 13 19:12:42 2006
Subject:Re: cx3 overdrive?

In global, there is a parameter for setting expression control. If
this is set to [pedal], the expression pedal will operate normally but
the exp/overdrive knob will do nothing. Try setting to [knob] or
[both]. Note that if you change a global parameter, it must be written
to save the new setting to internal memory if you want to save the
changes(pg 16, owners'manual). Hope this
helps. --
-
Steve
-
-- In CloneWheel@yahoogroups.com, "fredbk2002" wrote:
>
> Overdrive/exp knob does not alter the sound of any of the available
> programs. Unit was purchased used. I'd searched for an edit
functions
> that might have been altered relulting in this problem but no dice.
> Any similar problems/suggestions anhyone can offer?
>
> Also, recently read that cx3 was modeled after the C3, not the B3.
> Could this be why I'm not getting the ballsy sound I'd hoped for?
> Currently using twin Barbetta 41c's with a SE pre amp. Seriously
> considering replacing the works with the new XK1 and a MSpro145.
> Before committing another $3k+ to the project, was wondering if any
of
> the many cx3 aficiandos out there might offer some insight on the
> dilemma(?)
>
> Thank you.
>