From tande.adamson@btinternet.com Thu Feb 09 12:48:46 2006
Subject:Re: DLS300 manual needed


Hi,Can't help with an actual manual but there an interesting article
on the previous 223 here

http://www.soundonsound.com/sos/1994_articles/apr94/dynacorddls223.ht
ml

that list's amongst other things

• 00: ROM preset selection
• 01: Distortion amount
• 02: Room size
• 03: Rotor balance
• 04: Speed bass
• 05: Speed treble
• 06: Slow/fast ratio bass rotor
• 07: Slow/fast ratio treble rotor
• 08: Speed up bass rotor
• 09: Speed up treble rotor
• 10: Speed reduce bass rotor
• 11: Speed reduce treble rotor
• 12: Rotate direction bass
• 13: Rotate direction treble
• 14: Vibrato depth bass
• 15: Vibrato depth treble
• 16: Vibrato edge bass
• 17: Vibrato edge treble
• 18: Pan width bass
• 19: Pan width treble
• 20: Front/back mod bass
• 21: Front/back mod treble
• 22: Room back level bass
• 23: Room back level treble
• 24: Crossover frequency
• 25: Active bass EQ
• 26: Active treble EQ
• 27: EQ band 48Hz
• 28: EQ band 87Hz
• 29: EQ band 125Hz
• 30: EQ band 1500 Hz
• 31: Passive bass EQ
• 32: Passive mid EQ
• 33: Passive treble EQ
• 34: Output level
• 35: Comb filter delay bass
• 36: Comb filter delay treble
• 37: Comb depth bass
• 38: Comb depth treble
• 39: Comb notch/boost treble
• 40: Stop direction
• 41: Position monitor bass
• 42: Position monitor treble
• 43: Speed monitor bass
• 44: Speed monitor treble
• 45: Input level meter peak hold time
• 46: Sys Ex remote control on/off

Some of these items have changed on the 300 but it might give you a
starter

also

the basic front panel controls can be assigned to respond to almost
any kind of MIDI event, such as any controller, or even note
numbers. (See box for a list of the possibilities.)

Assignment of these functions is assisted by a neat Learn Mode;
simply press MIDI and the function you wish to assign, tweak the
controller on your keyboard, and it's memorised. All such settings
are global and retained at power-off. More than one function can be
given the same controller. I found it useful during editing to
assign Rotor Balance to the mod wheel so I could 'solo' one or other
of the speakers while adjusting its settings.

Hope this helps,
Good luck, Thomas

--- In CloneWheel@yahoogroups.com, "esuurmaa" wrote:
>
>
> Hi Group,
>
> Is there a kind soul out there who could either scan and email or
> photocopy and mail an English manual of Dynacord DLS300 to me?
>