From bruce@ashbysolutions.com Wed Dec 13 12:50:54 2006
Subject:Re: 2nd manual for CX-3

Hi Greg (and Tom),

The CX-3 can be tricked into being the lower manual by either of two means:

- Use Local Off, and set the Upper Tx and Lower Rx channels to the same MIDI channel. Set the Upper Rx channel to a different channel.

- Use the Split button, and set the split point to High C. The CX-3 treats all notes below the split INCLUDING THE SPLIT KEY as Lower Manual.

Regards,

-BW
--
Bruce Wahler
Online Music Sales
AshbySolutions.com™ http://music.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com

At 03:18 PM 12/13/2006, you wrote:
>Hey Tom,
>
>Just as a clarifying note of caution... on most clones, the midi input
>controls the lower manual, and the built-in keyboard on the unit
>itself always plays the 'upper manual' (ie the one with percussion,
>etc) At least this is the case with the Nord Electro and some others,
>not sure about the Cx-3. You mentioned putting your new midi
>controller "on top" of the CX-3, which would mean it would be
>ergonometrically (new word!) squirly. (play left hand on the
>physically upper maunal, the opposite of a B3)
>
>Greg
>
>--- In CloneWheel@yahoogroups.com, "Tom" wrote:
>>
>> Hello folks,
>> Just wondering what you guys are using for a 2nd manual, on top of a
>> Korg CX-3.
>
>To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>Yahoo! Groups Links
>

[Non-text portions of this message have been removed]