From jjmcs49@yahoo.com Mon Apr 24 05:49:31 2006
Subject:Re: XK-1 day

The XM-1, XK-3 and according to the owners manual, the XK-1 use CC
#'s 80, 81 and 82 to control the upper, lower and pedals. The way
they do this is CC 80 values 0 through 9 = 16" drawbar #'s 0 - 8, CC
80 values 9 - 17 = 5 1/3 drawbar 0 - 8, CC 80 #'s 18 - 26 = 8" #'s 0 -
8 and so on. I have used an XM-1 to control my XK-3 and currently
use a Peavey PC 1600x to control the lower manual's drawbars. Here is
a tip: If you use a programmable MIDI slider box like the PC1600x,
set the Max value at 0 and the Minimum value at 8 (for example) and
the drawbar value will increase as you pull the slider toward you.