From bruce@ashbysolutions.com Sat Oct 29 09:13:16 2005
Subject:Re: Volume/Expression Pedal

Good, then Ham-Suz has started to abandon some of their proprietary ways!

Regards,

-BW

--
Bruce Wahler
Design Consultant
Ashby Solutions™ http://consult.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com

At 08:34 AM 10/29/2005 -0700, tonysounds wrote:
>Yeah, I do the same thing; I have the EXP100F pedal,
>but the FC7 takes up a LOT less room in my cable case.
>
>Plus, when I switch to using the Electro, or my
>current rig of Doepfer controlling B4 (with the
>Electro as a remote keyboard..the only cable attached
>is the midi out, nothing else) the FC7 is still used
>and I don't have to rearrance my pedal board.
>
>T
>
>--- Steve Moenssen wrote:
>
>> Bruce,
>>
>> I use a Yamaha FC7 with my XK-3 (via the MIDI IN
>> setting).
>> All of the equal-loudness parameters are supported.
>> It is also supported via the PEDAL 1 jack... and if
>> you rewired your FC7 for an Electro (like me) you
>> can
>> use the PED1(NORM) setting without having to switch
>> the wires back!
>>
>> Steve
>>
>> --- In CloneWheel@yahoogroups.com, Bruce Wahler
>> wrote:
>> > In earlier Hammond-Suzuki clones, the effect
>> requires use of the
>> optional expression pedal. However, since the XK-3
>> has an input for an
>> industry-standard expression pedal, too, I was
>> curious if the full
>> expression effect is available there. Has anybody
>> tried this?
>> >
>>
>
>
>__________________________________
>Yahoo! FareChase: Search multiple travel sites in one click.
>http://farechase.yahoo.com
>
>To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>Yahoo! Groups Links
>
>

[Non-text portions of this message have been removed]