From hammond.b3@verizon.net Mon Nov 28 08:20:15 2005
Subject:Re: "New 2101" FF100W Driver?

It's not a snap to get to, it takes a few minutes.
This will sound very weird but....
You have to take one of the corner protectors off then four screws and the
back slides out. Take a small mirror and slip it under the driver. The
wattage is stamped on the bottom of the driver ie 50 watt or 100 watt.
Or if you happen to be a dentist take a dental mirro and slide it under the
driver. ;>).
Chuck

> Pulling the back off and checking the driver would do it! I would
> think new 2101 owners would want to know what wattage driver came
> with it. The difference is quite startling as witnessed from my own
> 122 conversion. I'll be trying to get a hold of Suzuki myself today
> < thanks for the suggestion Chuck> and see what I can find out. I
> just thought someone out there had the same concern with a recent
> 2101 purchase.
>
> --- In CloneWheel@yahoogroups.com, "chuck" wrote:
> >
> > You can always pull the back off and look at the driver if you
> have to know
> > right away, OR call HS tomorrow and give them the serial #,
> they'll tell you
> > in about 2 seconds.
> > Chuck
> > ----- Original Message -----
> > From: "vwchm0"
> > To:
> > Sent: Sunday, November 27, 2005 7:44 PM
> > Subject: Re: [CWSG] "New 2101" FF100W Driver?
> >
> > > Well, I'm not really sure. Perhaps it is in the manual specs or
> some other
> > documentation
> > > that came with it.
> > > Nick
> > >
> > > --- In CloneWheel@yahoogroups.com, jay.fortunato@c... wrote:
> > > >
> > > > I bought one Friday. How can you tell which driver its got?
> > > > Jay
> > > >
> > > > -----Original Message-----
> > > > From: CloneWheel@yahoogroups.com
> > > > To: CloneWheel@yahoogroups.com
> > > > Sent: Sun Nov 27 12:56:29 2005
> > > > Subject: [CWSG] "New 2101" FF100W Driver?
> > > >
> > > > Has anyone purchased a 2101 lately and does it now come with
> the FF100
> > Watt
> > > > driver? If so is there a certain S/N I should be looking for
> when they
> > > > started the
> > > > introduction of the 100 instead of the 50 Watt drivers?
> > > >
> > > > Check out this website:
> > > > http://www.fortunecity.com/business/huntsman/1056/
> > > > tone_and_tone_cab__svc__company_leslie_21_system.htm
> > > >
> > > > It touts the "New" series Leslies. The two updated features
> for the 2101
> > > > are:
> > > > 1) The Leslie 2101 and the 21 System has a custom designed
> Ferro Fluid
> > 100
> > > > watt RMS
> > > > compression driver.
> > > > 2)The Leslie 2101 and 21 System has a Custom Molded ABS Horn
> now with a
> > NEW
> > > > long life
> > > > Ball Bearing Assembly and Shock Mount. This upper horn never
> needs
> > oiling!
> > > >
> > > > The site also has descriptions of the "new" wood leslies now
> with an "N"
> > in
> > > > the model
> > > > numbers - ex. 122NXB 147NA etc... I tried looking these
> updated models
> > up
> > > > on the net
> > > > (in hopes of finding out more about the 2101) and could find
> nothing
> > except
> > > > for what's on
> > > > the above site.
> > > >
> > > > I want to make sure I get the 100W since I will be adding it
> to my Goff
> > 122
> > > > which has an
> > > > Atlas 100W and also because of the blown driver complaints
> found on
> > earlier
> > > > production
> > > > models.
> > > >
> > > > Thanks much - Nick
> > > >
> > > > To unsubscribe, send email to: CloneWheel-
> unsubscribe@yahoogroups.com
> > > >
> > > > _____
> > > >
> > > > YAHOO! GROUPS LINKS
> > > >
> > > > * Visit your group " CloneWheel" on the web.
> > > >
> > > > * To unsubscribe from this group, send an email to:
> > > > CloneWheel-unsubscribe@yahoogroups.com
> > > >
> > > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > > > Service.
> > > >
> > > > _____
> > > >
> > > > *******
> > > >
> > > > This message and any attachment are confidential and may be
> privileged
> > or otherwise
> > > protected from disclosure. If you are not the intended
> recipient, please
> > telephone or email
> > > the sender and delete this message and any attachment from your
> system.
> > If you are not
> > > the intended recipient you must not copy this message or
> attachment or
> > disclose the
> > > contents to any other person.
> > > >
> > > > For further information about Clifford Chance please see our
> website at
> > http://
> > > www.cliffordchance.com or refer to any Clifford Chance office.
> > > >
> > >
> > > To unsubscribe, send email to: CloneWheel-
> unsubscribe@yahoogroups.com
> > > Yahoo! Groups Links
> > >
> >
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
> Yahoo! Groups Links
>