From maxl@u.washington.edu Sat Feb 26 18:33:29 2005
Subject:Re: XK-3 power up fault. expression function lost.


Did you make sure that the expression source was set to EXP100 in the
CONTROL menu? For instance, my XK3 sometimes secretly changed the
setting to MIDI IN after playing one of the demo songs.

-Max

Thomas Adamson wrote:

>
> Any-one experienced this fault? Just a couple of times in a two month
> period, I found that the EXP100 expression pedal didn't function on
> power-up; neither expression nor the side kick switch worked.
>
> I initiallized the board and all was OK. Fortunately on the second
> occasion I had just bought a CF card, and had saved my settings. The
> first time I had had to re-edit all my settings.
>
> Also, on advice from Hammond I bought an IO data CF card ( 64
> meg ), which is supposed to be compatible, but if it's in the
> instrument on power up, the XK doesn't power up unless you switch it
> on /off /on. ( This has nothing to do with the expression pedal
> fault, as the card wasn't in the 'board at the time )
>
> So my second question is, is it best to leave the card out of the
> instrument unless required? Removing and replacing the card is not
> good practice over a long period of time I would have thought, but
> on/ off /on doesn't seem like a good idea either.
> Thomas.
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> click here
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
> * To visit your group on the web, go to: