From guilherme.ruppert@ic.unicamp.br Fri Feb 04 03:35:23 2005
Subject:Re: Roland VR-760


Hi Peebee,

I tried your tip but when I press (arrow-right)+(synth)+(edit) it enters
in a screen like this:

Ver: 1.05 Bls: 046
Boot Ver: 1.01

Then I discovered that I need to press (arrow-right)+(edit) to enter in
the test mode, but there is a problem... It shows:

Device Check <>
Now checking: C
Now checking: D
Now checking: E
Now checking: F
Now checking: G
67

And it freeze in this screen. Then I need to press (edit)+(arrow right)
to enter in the SW/LED CHECK....

It that all right.... Your unit does the same thing?

[]s

Guilherme Ruppert

> ----- Original Message -----
>From:
>To: CloneWheel@yahoogroups.com
>Sent: 2/2/2005 11:50:59 AM
>Subject: Re: [CWSG] Roland VR-760
>
>I just got my V-Combo out of the shop. My damper pedal was intermittent
>for a year or so until finally it just stopped working. ( on a important
>gig of course!) The problem was not the pedal or the jack on the rear of
>the V-combo. It turned out to be a software glitch and by resetting the
>system, it fixed the problem. Bye the way, heres a secret to all you
>V-combo guys and gals out there. To get into test mode, witch is used to
>check all the functions and knobs on the board as well as factory reset,
>you press and hold (arrow right)&(synth one touch) then press (edit), and
>bodabing!! your in.
>
>Peebee32000
>