From rhodesman62@yahoo.com Wed Aug 17 07:02:48 2005
Subject:Re: CX-3 drawbar display problem

Mine shows the actual setting. You might have a problem.

chain_recurrent wrote:Could someone with a CX-3 v.2 try this out? In Normal mode press [EDIT] and press
PROGRAM [2] so that you're looking at the upper drawbar parameter settings. In the
Drawbar 2 section set the 2' to 0 and set 2 2/3' to 8. Does the display show that 2 2/3' is
all the way out? (My display shows it at about 6 rather than 8). Now set 2 2/3' to 0 and 2'
to 8. Does the display show that 2 2/3' is all the way in? (My display shows it at about 1
rather than 0). I'm wondering if this is a mechanical problem with my unit or if it's a
software issue. Any thoughts?

Thanks!

To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com

SPONSORED LINKS
Music instrument stores Service mark Oberheim Hammond Korg

---------------------------------
YAHOO! GROUPS LINKS

Visit your group "CloneWheel" on the web.

To unsubscribe from this group, send an email to:
CloneWheel-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---------------------------------


---------------------------------
Start your day with Yahoo! - make it your home page

[Non-text portions of this message have been removed]