From lskdgjh@yahoo.it Thu Apr 14 16:35:23 2005
Subject:Re: low pro cable

It looks like i did all my homework (5 wire midi cable, checked
everything, volumes etc)
The speed change works (with the light too) but no sound.
Man I'm so bummed out.
The store guy said the will have it fixed and give it to me in
working condition. If not I'll just get my money back.
I'll let you know how it goes. in the meantime thanks so much for all
the advices.

Niccolò

>I know that you have probably checked out this stuff, so if I am going back
>over suggestions that you have already received, I am sorry!
>
> I have hooked up the lo pro to the 3T many time. All that you should
>need to do:
>
>1. hook a midi cord from the 3T into the low pro
>
>2. plug a cord from the three prong outlet from the 3T into the outlet on
>the low pro
>
>3. plug a cord from the three prong outlet on the low pro into the wall
>
>4. turn on the power switch on both the 3T and the low pro. There should be
>a light on the front of the 3T as well as the front of the lo pro that
>lights.
>
>5. plug your keyboard into the input on the 3T
>
>6. rock out!
>
> Other things to check: check out the volumes on the 3T as well as the
>volume switch on the back of the lo pro.
>
> It should not matter, but you can also change some of the ramp up and
>down times on the lo pro, and it is possible that it is not working
>correctly, due to something internal.
>
>I hope that this helps,
>
>Mike
>