From jjmcs49@yahoo.com Tue Sep 14 16:27:56 2004
Subject:Re: Using XK-3 with a Leslie Connector

If you have The Leslie 21 System (upper and lower units) or the
upper unit connected to another amp for the lower rotor sounds as
well as the stationary channel, the brake button does one of two
things. First, you have to tell the XK-3 via a Leslie parameter
setting whether it is connected to a one or 2/3 channel Leslie. If
it is a 3 channel Leslie (21 System), when the brake button is lit
and the Leslie on button is turned off, the rotor coasts to a stop
and the sound continues to come out the horn. If the brake button is
off and the Leslie on button is turned off, all sound is routed to
the stationary channel output to the lower unit.

If the XK-3 is connected to a single channel Leslie, the brake
button has no effect on anything.


--- In CloneWheel@yahoogroups.com, "David Jacques"