From dfibraio@comcast.net Thu Sep 09 08:21:05 2004
Subject:Re: VK-8M Question

Crap. Foiled again.

At 11:17 AM 9/9/2004, you wrote:

>I'm not actually plugging my EV-5 into the VK-8M...it's going into my
>QS7.1, and the QS7.1 is generating CC80 messages to the VK-8M. I'm
>not sure the EV-5 works directly with the 8M.
>
>--- In CloneWheel@yahoogroups.com, Damon Fibraio
>wrote:
> > This is the one thing I do miss about the VK7, the asignable pedal
>for
> > leslie simulation. I upgraded from a VK7 to a VK8M which is going
>into a
> > Motif es6. I wasn't aware that the EV5 would work with the VK8M,
>they only
> > mention the bigger Roland pedal in the manual, but I'll have to
>look into
> > this one for myself.
> >
> > At 10:25 AM 9/9/2004, you wrote:
> >
> > >Bill,
> > >
> > >I use an EV-5 to control the Leslie sim speed on my VK-8M, which is
> > >MIDIed to a Roland Fantom. When the pedal is fully down, the Leslie
> > >is at fast speed, when the pedal is fully up, the Leslie is on
>slow.
> > >
> > >Make sure the pot on the side of your pedal is set to go to "0"
>when
> > >the pedal is fully up.
> > >
> > >HTH
> > >
> >
>
>To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>Yahoo! Groups Links
>

--