From jjmcs49@yahoo.com Fri Dec 03 15:22:13 2004
Subject:Re: XK-3 Any-one know the answer to these two questions?


I don't know if this will be of help, but when the XK-3 is attached
to a Leslie via the Leslie cable, the right output is a clean non-
Leslied signal. The Leslie has to be turned on though so you
probably can't fool it with a jumper connector.

> > straight tonewheel sound out into say a rotary simulator for
> onward
> > transmission to a mixer, but you must have a return signal back
> into
> > the XK-3. I was told something similar in regards to the effects
> send
> > and return on my R3-147 but it turned out not to be the case.
> > Can you confirm whether the 'return' connection is necessary?
> > I'm thinking of sending a signal into my Motion-Sound rotary
> cabinet
> > and combining its output with the rotary sim output coming from
> the
> > XK-3's line-out.
> > Thanks, Thomas.