From claire_trikes_aust@iprimus.com.au Tue Apr 20 06:45:25 2004
Subject:Re: MidiOx with B4

Hi Doug,

Thanks for your help. I'm sure that will be a great place to start. I'll
load MidiYoke and have a 'play' with that !

Thanks again ! Much appreciated.

Regards,
Claire


> Hi Claire
>
> You will need to download the companion to MIDI-OX, MIDI Yoke. Pay
> attention to your installation, though its not really difficult. MIDI
> Yoke allows you to create virtual ports. Then, in your MIDI-OX setup
> you'll route your chain allong the lines of:
>
> MIDI Yoke NT: 1(input) - MIDI Yoke NT: 1 (output)
>
> Then on your B4, use the MIDI Yoke NT: 1 as your input, instead of
> your MIDI device (i.e. Midiman, etc.)
>
> The key is that you'll need MIDI Yoke. From there, you might have to
> read the help section to get the idea, but you'll get what your
> looking for. I have a VERY slick midi map for the CX-3 and EVB3.
> MIDI-OX in conjunction with MIDI Yolk will allow you to integrate your
> software clone as if it were the engine inside your hardware
> clone/controller.
>
> Good luck with it and keep us posted as you get it up and running.
>
> Regards,
>
> Doug
>
> --- In CloneWheel@yahoogroups.com, "claire_trikes_aust"
> wrote:
> > Hi every one !
> >
> > I'm having a bit of trouble....Can you help me ?
> >
> > How do you get MidiOx "in between" the midi keyboard and B4 ?
> >
> > I've been sending midi straight from the keyboard (Edirol PCR50) to
> B4 with huge success for some time. Now I want to do some 'tweaks'.
> I'm running MidiOx OK, and I've had no trouble setting it up to "see"
> all of the notes and codes etc. from the keyboard, but it doesn't
> matter what changes or mappings I make, B4 just 'listens' to the midi
> straight out of the keyboard. How do I get B4 to 'listen' to the
> output of MidiOx instead of the keyboard ?
> >
> > Any help would be greatly appreciated. Thank you.
> >
> > Best regards,
> > Claire
> > Australia
> >
> > [Non-text portions of this message have been removed]
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
> Yahoo! Groups Links
>