From goff747@aol.com Fri Sep 05 23:29:33 2003
Subject:Re: Putting Handles on Leslie Cabinet


In a message dated 9/6/03 6:45:43 AM, rockwithxs@aol.com writes:

<< Cut a 12mm (1/2") coated board of plywood a little smaller than the
Leslie's fottprint, mount 4 solid casters and 2 solid snap-handles,
flite-case style, on the *underside*, with the "axle" on the handles
as close to the front side as possible, the handles facing towards
the centre on the underside. Fasten the board to the bottom of the
Leslie with 8mm T-nuts and bolts.
>>
what he said....