From ynottnaro@yahoo.com Thu May 01 06:17:43 2003
Subject:Re: both manuals; same drawbars >:(

You mean the CX3 is responding to the sampler, right?
In other words, the sampler is Midi Out to Cx3 Midi
In. If I understand you correctly then, have you
checked the midi channel assignment on both units to
make sure they correspond correctly? It sounds like
the problem and solution lie in your CX3, not your
sampler. That is unless your sampler is
multi-timbral, in which case make sure its not in (to
use Roland's jargon) Performance mode, but in Patch
mode (or to use Korg's jargon, "not in Combi mode").
You are correct in assuming that if the sampler is
indeed handling the note-on/note-off chore correctly,
it's not a problem with the sampler.

T
--- cortez_the_killer8771
wrote:
> I have had my cx-3 plugged into an old 80's sampler
> to use as my
> second manual for some time now. today i noticed
> that the old
> sampler stoped responding to the second drawbars and
> will only do
> what the upper manual drawbars are set to. i
> checked the MIDI IN TO
> LOWER setting, and it is on, the MIDI cable seems
> fine, and since the
> controller is responding to the CX-3 at all it seems
> like it still
> working. anyone know what may be going on?
>

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com