From djacques@csulb.edu Mon Jul 21 22:49:30 2003
Subject:RE: 1963 B3 settings for the CX-3?

As requested, I am reposting my custm CX3 settings,,,,

> -----Original Message-----
> From: Brian Fuller [mailto:fingerz@erinet.com]
> Sent: Monday, July 21, 2003 3:47 PM
> To: djacques@csulb.edu
> Subject: 1963 B3 settings for the CX-3?
>
> I searched the archives and came up empty handed. WOuld you
> be able to send them to me? Thanks, Brian Fuller
>
----
For those who asked, here are the program settings that I use to match
my CX3 version 2 to my 1960 B3 and twin Leslie 145's... This Hammond and
Leslie rig has a lot of bite to it and is on the rockier side... It
sounds quite a bit sharper and distinctive than my 1955 B3 with twin
22H's that I use for mellow blues and jazz.

Output: 127
Wheel Type: Vintage
DB Level Curve: Mellow
Overtone Level: 32
Leakage Level: 38
Noise Level: 0
On Click Level: 34
Off Click Level: 17
DB Preset's Percussion: ENA
Perc Normal Level: 91
Percussion Soft Offset: -31
Normal Percussion DB ATT: 10
Percussion Fast Decal: 36
Percussion Slow Offset: 40
Amp Type: 2
Speaker Sim: ON
Amp Gain: 4
Tone Treble: 0
Mid: 0
Bass: 2
Reverb Type: Plate
Reverb Time: 3.40
Reverb Mix Level: 18
Reverb Routing: Rev-7 Rot
Horn 60 Rotor 40
Horn Slow Speed: 9
Horn Fast Spped: 90
Rotor Slow Speed: 8
Rotor Fast Speed: 85
Horn Up Transit: 5
Horn Down Transit: 7
Horn Stop Transit: 20
Horn Start Transit: 15
Rotor Up Transit: 60
Rotor Down transit: 33
Rotor Stop Transit: 82
Rotor Start Transit: 66
Horn Mic Distance: 91
Horn Mic Spread: 60
Rotor Mic Distance: 87
Rotor Mic Spread: 45

I run my Speakeasy levels at around 3:00 and the Bass and treble
flat....