From bardian@usadatanet.net Mon Jul 21 15:29:54 2003
Subject:Re: VK7 control Electro?

I think any MIDI controller number is assignable to each VK7 drawbar. If
this is true, I would need to find out which MIDI controller number is
assigned to each Electro drawbar. Is this information in the Electro
handbook?

----- Original Message -----
>
> snip>I know the VK-7 can assign each drawbar to any MIDI controller.<
>
> What are you meaning by the above? Is it possible to assign any cc#
> to any drawbar on the VK7? Usually the numbers are fixed.
> Like 16ft cc#20 5 2/3 cc#21 etc.
> The Electro responds to its own fixed designated midi controller cc#s.
> If these numbers are the same as the VK7's ( which is not likely )
> then the VK 7 would control the Electro. If not, but each of the
> VK7's drawbars each have a separate cc#, they can still control the
> Electro's bars, but you will need a Midi Solutions Midi Mapper to be
> placed ( in the midi line ) between the VK7 and the Electro. The
> Mapper re -assigns the numbers to match the receiving ( Electro )
> module or keyboard's numbers.
> Midi Solutions have a PC edit program for free download from their
> web-site.
> I use a Viscount DB3 to control the Electro's upper drawbars and a
> separate Doepfer Pocket Fader, to control the lower drawbars.
> This works a treat.
> Regards, Thomas.
>
> --- In CloneWheel@yahoogroups.com, "Barry" wrote:
> > This may have been asked before, but is it possible to use the VK-
> 7's drawbars to control the Electro's drawbars (or drawlights or
> whatever they're called)? I know the VK-7 can assign each drawbar to
> any MIDI controller.
> >
> > Thanks!
> >
> > [Non-text portions of this message have been removed]
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>