From bruce@ashbysolutions.com Sun Feb 23 07:18:58 2003
Subject:Re: MIDI drawbar unit on EBay

Hi Jim,

>Can this be used to control an Electro or would you need a mapper somewhere
>between them? The product manual link on the Voce site is dead for the
>drawbar manual. The unit is at
>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1289&item=2509620968&rd=1.

You can use this to control an Electro of B4, but you most likely will need a mapper. The MIDI Drawbar Module (MDM) sends CC#12-20 as the "main" drawbars, and -- if it's a newer version -- CC#21-29 as the "aux" drawbars. These values don't perfectly map to most of the other clones.

Oh, and if you're looking for the manuals, I have all the obsolete Voce manuals archived on my CloneWheel site (http://music/ashbysolutions.com/clonewheel). Look in the Voce section for "Manuals." I have both the newer and older manuals there; technically, there was only a newer manual, but I cut-and-pasted it into an older one, too.

If you need a Mapper, contact me offline.

Regards,

-BW

--
Bruce Wahler
Ashby Solutions™ http://music.ashbysolutions.com
978.386.7389 voice/fax
bruce@ashbysolutions.com