From mkarl2@uswest.net Fri Dec 26 10:14:14 2003
Subject:Re: Speed Control Pedal - Motion Sound

--- In CloneWheel@yahoogroups.com, "jake92028" wrote:

> I figure if you took the top off a MS rotary horn cabinet and
traced the post-transformer low current DC wires to the motor, the
same concept would work. But there must have been a reason MS quit
making its original "gas pedal."

It may have been just financial - too low a volume to continue
production. There is still a schematic on how to construct one in
the site:

http://www.motion-sound.com/Tech%20Scans/gpschem.jpg

Although it looks like it was scanned off the back of a napkin.

One of the zits in the Motion Sound Pro3T/LP120 design is the lack of
rotor speed information. The only info is a 'FAST' LED on the
Pro3T. Fine. What about slow vs. stopped?

I notice there are several tech mods to add stopped/slow/fast LEDs to
the existing control footswitch. Hell, I don't care about lights by
my FEET, I want lights on the FRONT of the Pro3T! I don't want to be
looking at my feet all the time.

Karl