From formercakid@yahoo.com Wed Dec 03 07:52:24 2003
Subject:Re: Tube Rotosphere question...Changing Tube

Here is a shortcut - if you want to be able to swap
tubes in the Rotospere easily just remove the plastic
window and store it away. When you are not playing
just cover the window area with clear packaging tape.
--- Mundaka Lee wrote:
> I've used my Rotosphere with V5 cranked for over 5
> years with no problems.
>
> I use 2 separate Boss latching footswitches with led
> status indicators Y'd
> together... one for hand and one for foot. The mono
> male 1/4" plug of the Y
> gets inserted half way into the footpedal jack (it's
> an RTS jack that can accept
> a single 2 button switch... one button for bypass,
> and the other for speed
> switching... I only use speed switching)
> When both Boss switches are on, it does fast speed.
> With one or the other
> off, it's on slow
>
> I've opened it up to change the tube... you need to
> remove the screws from
> the end plates, and the nuts from the jacks in the
> back, then slide the circuit
> boards out the side.
>
> Enjoy,
>
> Mundaka
>

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/