From steve@speakeasyvintagemusic.com Sat Sep 14 11:36:47 2002
Subject:Re: Pro 3T problem

Hi

Because of how the Motion Sound logic works. You have a broken stop switch.
This is a easy fix.

Shayes

Steven Hayes Sr Engineer
Speakeasy Vintage Music
http://www.speakeasyvintagemusic.com
----- Original Message -----
> I was wondering if anyone could offer a suggestion. I don't want to
> wait 'till Monday to call MS. I was at the gig last night, packed
> house pretty girls etc. (OK - not too relevant, but had to paint the
> whole picture), and my slow speed would not work. The Pro 3T would
> just go from fast to break regardless of which position the stop
> switch was in. I plugged a single mono patch cord in the speed input
> and when shorted the MS would go into slow speed as normal, but when
> I used their pedal I couldn't get it to work. I assumed it was the
> pedal - a short in the wire or bad switch. My original PRO3's pedal
> developed a short in its wire. I took the back off the pedal and all
> the solder connections looked good. And if I stamped real hard on
> the Stop button it seemed like the slow speed would intermittently
> come on, but couldn't get it to hold.
>
> Got through the gig OK, but I sure missed my slow speed!!!! I
> almost ran the CX-3 direct, but I really love the spatiality the MS
> gives me on stage.
>
> Any thoughts would be appreciated.
>
> Thanks!
>
> Albert
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>