From worthogis@shaw.ca Fri Sep 06 12:47:25 2002
Subject:Re: Using Multiple Leslies

I am not Steve but I will try to answer your question.
If you are using a Tonewheel Hammond with start run switches there could be problems, if you hook the 145 off of the output of the 45 it will work but, you may end up frying the run switch on your organ in the process. The AC drawn from the Leslies and the organ all run through the "run" switch, this can be too much current for an old run switch.
If you add an AC plug to the 45 and instead of getting power through pins 3 and 4 from the organ, you will not stress the run switch.
I have fried a couple of run switches starting an organ with two Leslies.
If you are using a Clone with your Leslies there will be a seperate mains supply for the Leslies and no Run switch so there should be no problems.

I hope this helps,
Ron Bell.

----- Original Message -----
From: Mark Zyla
To: Clonewheel
Sent: Friday, September 06, 2002 11:38 AM
Subject: Re: [CWSG] Using Multiple Leslies

Question for you Steve Hayes:

I'm about to pick up a Leslie 145. Can I just run a cable from my 45 into
the 145???

mark

[Non-text portions of this message have been removed]