From derrick_claridge@hotmail.com Sun Nov 03 09:07:20 2002
Subject:Re: MIDI Drawbars AC adapter trashed

Absolutely right, thanks for catching that Tony. You can find that
information where the power supply plugs into the unit. There will
be a picture showing you whether the tip or the sleeve of the
connector is positive. Derrick

--- In CloneWheel@y..., ynottnaro wrote:
> DON"T FORGET TO MAKE SURE THE POLARITY IS CORRECT!!!!
> tony
> --- Derrick Claridge
> wrote:
> > Check the voltage output and current requirements on
> > your drawbar
> > unit: the volts will have a 'Vdc' or 'Vac' after the
> > number, the
> > current will have an 'mA' after the number. A
> > common rating is 12Vdc
> > and 300mA. With that information you can go to
> > RadioShack, or
> > anywhere and be confident you'll get an acceptable
> > replacement.
> > Of course, the old end off the trashed unit will
> > help too, but you
> > still need the voltage and current requirements of
> > your drawbar unit.
> > Check the power supply you just burnt up to make
> > sure it was
> > sufficient. Derrick
> >
> > --- In CloneWheel@y..., "gmal74us"
> > wrote:
> > > What ac adapter can I use as a replacement? Does
> > Radio Shack carry
> > > these? Thanks. Tom
> >
>
> __________________________________________________
> Do you Yahoo!?
> HotJobs - Search new jobs daily now
> http://hotjobs.yahoo.com/