From jmaher080171@yahoo.com Wed Jan 30 19:41:06 2002
Subject:Re: Volume pedal on Hammond B3

I put a new plug on the end of the FC-7 pedal (per Bruce's
instructions, with the reversed tip and ring wires) and it works
great on my Roland XP-50. Radio Shack has a gold stereo 1/4"
plug with screws inside, so you don't even have to solder the
wires if you don't want to (although I did). Good luck.

John Maher

--- In CloneWheel@y..., Bruce Wahler wrote:
> Lon,
>
> >Do you know if the FC-7 will work on a Roland XP-50? I don't
like the EV-5
> >either, but I thought since it was a Roland to a Roland I was
stuck.
>
> The FC-7 will work, but you will have to cut the plug off the cord
and replace it with another one, or make an adapter cable.
Basically, the wiring to the first two connections on the plug (tip
and ring) are reversed between Yamaha and Roland.
>
> There are more explicit directions in the archives.
>
> Regards,
>
> -BW
>
> --
> Bruce Wahler
> Ashby Solutions™ http://music.ashbysolutions.com
> CloneWheel Support Group moderator
> 978.386.7389 voice/fax
> bruce@a...