From bruce@ashbysolutions.com Sun Aug 11 20:15:35 2002
Subject:Re: CX-3 setup


>I just joined and have a quick question. Just sold my XK-2 and
>bought the CX-3. Had the Hammond since '98, but really dig the
>Korg's feel/action. At my first gig last night I noticed that I was
>having a hard time getting the Korg to scream and punch above the
>mix. I play in a four peice soul / R&B group with guys who are good
>about listening and volume. I have a Pro 3T and an old Roland Cube
>100 (15, horn and dome tweeter). I'm not too fond of the Roland - it
>clips and is kinda harsh (especially with my K2600 piano samples),
>but in the case of using it as the low end of the Pro3, it worked
>fine with the Hammond. I set the Korg to Pre-amp as not to use the
>amp modeling, but it still isn't getting as close as the Hammond to a
>Hammond, if you know what I mean. Any thoughts on settings? Been
>toying with it all day and I'm still not there yet.

I've posted a some settings at http://music.ashbysolutions.com/clonewheel/ which can get you started. YMMV, of course, and I change my mind a little about the "perfect" settings all the time. I'll probably change them again with the v2 upgrade ...

Regards,

-BW

--
Bruce Wahler
Ashby Solutions™ http://music.ashbysolutions.com
CloneWheel Support Group moderator
978.386.7389 voice/fax
bruce@ashbysolutions.com