From bruce@ashbysolutions.com Sat Apr 13 16:12:50 2002
Subject:Re: VK-7 midi

All,

Anyone who needs MIDI Solutions devices, contact me offline.

Regards,

-BW

--
Bruce Wahler
Ashby Solutions™ http://music.ashbysolutions.com
CloneWheel Support Group moderator
978.386.7389 voice/fax
bruce@ashbysolutions.com

At 09:24 P 4/13/2002 +0000, you wrote:
>Barry,
>
>I had the same problem. I now use a Midi-Solution Relay module. If
>your not aware of this, it allows you to listen for MIDI data
>(channel, controllers, etc.), in this case Modulation, and triggers
>a relay which outputs to a 1/4 inch jack. I have this little module
>vecroed to the back of the VK-7 with a very short patch cable. The
>MIDI-Solutions Relay module gets it power from the MIDI ports so no
>wall warts are required. It works great! Here's the link:
>
>http://www.midisolutions.com/prodrel.htm
>
>I chose this in addition to the foot trigger, because I occasionally
>use a Roland AX-1 to control the VK-7. The AX-1 has a modulation bar
>that I squeeze to toggle the fast/slow on the VK-7. It works sweet!
>
>MIDI Solutions provides a software program to configure the module.
>If you have a PC with a MIDI output, you will have everything you
>need to make this work.
>
>Best of luck,
>
>Tony