From kirk_topits@csi.com Fri Oct 19 19:18:07 2001
Subject:Re: CX3 leslie

Hi Dean,

The Leslie settings more our less track 2 standard 3 speed leslies (122 and 147?) and a 2 speed leslie (fast stop). In general, I have found the speed up/slow down times a little too long. The settings break down to either SPEEDS or LEVELs. The speeds are separate for Horn and Rotor, with Spin up/Spin down/Fast/slow/transition times (relative times on scale 0-99)
The levels are horn to rotor balance, Horn and rotor mic distances (aka how intense is the effect) and mic angle (aka phase intensity - If you use stereo, you probably want to match this to left/right speaker postion). I found that the mic distance probably needs to be decreased (increased leslie effect). If you have a real leslie that you are used to (they all vary a bit), you can pretty much simulate it.

Kirk

----- Original Message -----
From: parakeys@aol.com
To: CloneWheel@yahoogroups.com
Sent: Friday, October 19, 2001 7:54 PM
Subject: [CWSG] CX3 leslie

Does anyone want to share any internal settings of the CX3 with the readers
of this group. In other words, Bruce said the leslie didn't sound "so hot"
out of the box.
(paraphrase).
Some of you have used it live and know what works out vs. in the house.

Thanks, Dean

Yahoo! Groups Sponsor
ADVERTISEMENT



To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]