From mattib@algonet.se Mon Jun 04 10:57:51 2001
Subject:SV: Leslie 122 stuck on slow speed

Hi!! ..

If the relay is broken.... then switch it to a Solid state or two (if you want brake funktion) then you can put a 11 pin Leslie conector in the 122 amp and run it whitout the connector kit you get no "pops or clic's" when switching speed. easy to convert. i can get you a plan if you want.
i have a Xk-2 and a 142 for live giggin whitout any connector kit works perfecly.......

cheers!
Mattias Björkman
www.hammond-center.com

----- Original Message -----
From:
> been able to get to Hamtech for some reason (have applied numerous times
> with no response). And when I access this website, the archives link is
> dead.
>
> I am now pretty sure that my problem is probably the relay. Will someone
> be kind enough to walk me through 1) best replacement relay & price; 2)
> how to replace it? (since I cannot utilize Hamtech for this)
>
> Thanks a million,
> Eric
>
> On Mon, 04 Jun 2001 01:11:10 +0100 Pete Whittaker
> writes:
> > I'm not a tech, but it sounds like a possible burnt out relay or
> > something in your Leslie amp. The gold mine for troubleshooting such
> > problems is the Hamtech list. It's a private list and involves you
> > jumping through some hoops to become a member, but IMHO is a
> > worthwhile
> > thing. You can elect to go *no mail* if you wish, and just scour the
> > archives when you need to (your current problem will almost
> > certainly
> > have been covered). More info at:
> >
> > www.hamtech.org
> >
> > Cheers,
> > Pete W
> >
> > eslawson@juno.com wrote:
> >
> > > Hello,
> > >
> > > I'm hoping that someone can help me troubleshoot this problem. It
> > > started sporadically about 1 week ago and is now a constant
> > problem.
> > > I
> > > use an XK2 to drive a 122 via the 1122 connector box which
> > provides
> > > current and takes the 11 pin out of the XK2 into the 6 pin of the
> > > Leslie.
> > > I use the slow fast button on the XK2 as well as a footswitch to
> > > toggle
> > > between slow and fast speeds on the 122.
> > >
> > > Well, about a week ago I noticed that the 122 would occasionally
> > stay
> > > on
> > > slow speed even when toggled to fast. It would do this for a few
> > > minutes
> > > and then start working fine again.
> > >
> > > Then at a gig this weekend, the slow/fast toggling stopped working
> > > altogether. It stays on slow constantly. No problems with the
> > amp
> > > that
> > > I can tell as it sounds great--just no fast speed. I plugged in
> > the
> > > motors individually and they are all working. So something is
> > amiss
> > > in
> > > the switching circuitry. I have never operated on this part of
> > the
> > > Leslie.
> > >
> > > Can anyone give me some pointers? I am having a terrible time
> > playing
> > >
> > > this one speed Leslie!
> > >
> > > Thanks,
> > > Eric
> > >
>
> To unsubscribe, send email to: CloneWheel-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>