From James.eaton@accenture.com Thu Apr 26 08:34:21 2001
Subject:Re: Questions about leslie 122/147 and Pro 3T

--- In CloneWheel@y..., Bill Bilhou wrote:
> You're never gonna get your Pro3T to sound like a Leslie. It just
isn't
> in the same league. It's a simulator, at best. I have a KBR-M and

I use an Alesis M-EQ 230 dual stereo band EQ with my Pro-3T plus an
old spacesound unit based Leslie clone lower rotor, heavily modified.

The signal from the organ goes into left channel of the EQ, then into
the Pro-3T, then out of the Low-Pro connector and into the right
channel, and then into the bass rotor.

EQ is set to give 12db rather than 18dB slope. Contour on Pro-3T set
to 7.

Sometimes (if I squint) it sounds like a 122, with a honky mid-
range. The sound is very sensitive to volume levels and room
placement though. Would still prefer a 122 but it wouldn't fit in
the car.

Cheers
James