From zutphen@xs4all.nl Sat Nov 11 01:31:15 2000
Subject:Re: [Voce] V5 newbie question

>- I read the manual 5 times but I still did not succeed in
>programming the registration for the left hand when using "split". Is
>this an overall setting for all presets or can each preset have it's
>own left hand registration?

Hi Wolfgang,

From the manual:
----------------
Both the split point and left-hand preset are programmable. To change the
split point and left-hand preset, hold the SPLIT button down until its
indicator starts flashing. You are now in split program mode. Any note you
press on the MIDI controller while in this mode will be interpreted as the
new split point. Any preset button(s) which are pressed while in program
mode are interpreted as the new left-hand preset sound. It is advisable to
prepare a left-hand preset prior to entering this mode. To do so, pick
another preset to overwrite. It must be different than the one using the
split. Save a new drawbar configuration by holding down the selected preset
button(s) until all the preset buttons light to indicate the settings have
been saved.
------------------

So what you have to do prepare a left hand registration and store it in on
of the memories (say no. 3).
Choose the preset you want to overwrite with the new split-setting. Press
the SPLIT button until its indicator starts flashing. Pres a note one the
attached keyboard, this will be the new splitpoint. Then press button 3 to
make registration no. 3 you left hand sound. Use the drawbars to make a
right hand sound. And store the new combination.

Good luck!

Jeroen